點擊放大 上一篇 : 71888-250mg標準品/3-硝基苯胺 下一篇 : 72708-1mg標準品/沙丁an醇-D3同位素
壇墨質檢科技股份有限公司(www.zgnyw.cn)主營產品：葡聚糖標準品,六六六標準樣品,真菌毒素標準物質,六價鉻標準物質,苯甲酸標準物質
壇墨質檢科技股份有限公司 版權所有 蘇ICP備19063113號-1 GoogleSitemap 管理登陸
壇墨質檢
電話
4008-099-669
手機
18168802993
在線客服
壇墨質檢科技股份有限公司(www.zgnyw.cn)主營產品：葡聚糖標準品,六六六標準樣品,真菌毒素標準物質,六價鉻標準物質,苯甲酸標準物質
壇墨質檢科技股份有限公司 版權所有 蘇ICP備19063113號-1 GoogleSitemap 管理登陸
4008-099-669
18168802993
正己烷
This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO 9001.
(液體)______________________
常溫，置于陰涼處
The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level(k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.
The balances used for gravimetric measurements are calibrated with weights traceable to the national standards. The calibration of the balances is verified annually by an external accredited calibration service. This analysis method has been verified using an approach consistent with ISO 17034:2016 & ISO 17025:2017.
GC
Water Content by Karl-Fischer Titration: 0.001%
This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.
This reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature here in. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture.
Read Material Safety Data Sheet (MSDS) and understand any potential hazard(s) prior to the use of this product. All chemicals should be considered potentially hazardous in nature and should only be handled by qualified personnel using established good laboratory practices.
Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.
It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample.Visit the support section of our website technology videos and frequently asked questions.